Telenor

Telenor APN settings

Set the Telenor data profile with the smallest safe change: APN `telenor`, device defaults for hidden fields, then a controlled mobile data test.

Tipo: Guía práctica Lectura: 7 min Actualizado: 2026-06-23

Start here

Use the APN as a controlled test, not a guess

This guide focuses on the Telenor profile for Norway and other Telenor markets. It keeps the setup short so you can test whether the APN is the real cause before changing sensitive fields.

If your phone already has a carrier profile, compare it first. A duplicate APN can make Android select the wrong profile, while iPhone may hide the APN menu completely when carrier settings control it.

APN fields by market

Telenor APN starting point

Field Value Use this note
Name Telenor Internet This is only a label inside your phone.
APN (Norway, Sweden, Denmark) telenor Main value for Nordic markets. Also try telenorinternet if telenor fails.
APN (Hungary) telenor.hu or internet.telenor.hu Hungarian Telenor (now Yettel) may use country-specific APN.
APN (Thailand) telenor.dtac or dtac Thai Telenor operates as dtac; use dtac APN.
APN (Malaysia) telenor or digi Telenor in Malaysia operates as Digi; use celcomdigi or digi APN.
APN (Pakistan) telenor Telenor Pakistan uses the standard telenor APN.
APN type default,supl Use only if the field exists and the phone accepts it.
Protocol IPv4/IPv6 or device default Keep the device default when unsure.
Username and password Blank unless supplied Most Telenor plans do not require credentials.

Telenor operates under different brand names in some markets (dtac in Thailand, Digi in Malaysia, Yettel in Hungary). If your SIM pack gives a different APN value, use the plan-specific value.

Setup

Setup steps

  1. Open the mobile network settings and find Access Point Names or Cellular Data Network.
  2. Create or edit the Telenor profile and enter the APN value exactly as shown for your market.
  3. Save the profile, select it if your phone asks, then disable WiFi for the test.
  4. Toggle airplane mode for ten seconds and open a browser before testing apps or hotspot.

Guide

Full setup and troubleshooting notes

Before changing the APN

Use this page when a Telenor SIM is active but mobile data does not browse, apps stay offline, hotspot sharing fails, or the phone lost its profile after a network reset. The first rule is to make the smallest useful change. An APN profile controls how the phone reaches the packet data gateway, but many fields are filled by the SIM, the operating system, or the carrier profile already stored on the device. Editing every field at once can make a simple problem harder to diagnose.

For most Telenor markets, start with `telenor` as the APN value. If your SIM was issued in Hungary by the former Telenor Hungary (now Yettel), the APN may be `telenor.hu` or `internet.telenor.hu`. In Thailand, Telenor operates as dtac and the APN is typically `dtac`. In Malaysia, Telenor owns Digi and the APN is `digi` or `celcomdigi` after the merger with Celcom.

What to enter first

The practical setup for Telenor is intentionally short. Set the profile name to something you will recognize, enter the APN value for your market, save the profile and select it. Leave username, password, proxy, port, server, MMSC, MMS proxy and MMS port empty unless your device already contains a value or Telenor support has provided one for your plan. If MCC and MNC are visible, do not rewrite them by hand unless the phone refuses to save the APN without them.

On Android, the menu is usually Settings, Network and Internet, SIMs, Access Point Names. Samsung and other vendors may call the same area Connections, Mobile networks, Access Point Names. On iPhone, open Settings, Cellular or Mobile Data, Cellular Data Network. Some iPhones hide APN editing when the carrier profile controls it; in that case a carrier settings update or a SIM refresh may be needed instead of manual editing.

Testing your connection

After saving the APN, disable WiFi and toggle airplane mode on for ten seconds. Open a browser and load a simple page. If it loads, test messaging, streaming, and hotspot one at a time. If it does not load, the problem may not be the APN: check signal strength, SIM status, data plan balance, and roaming settings.

Telenor by country

Norway — APN: `telenor`. The default for all Telenor Norway plans. Works for 4G and 5G.

Sweden — APN: `telenor`. Telenor Sweden uses the same APN as Norway.

Denmark — APN: `telenor`. Telenor Denmark also uses `telenor` for most plans.

Hungary (Yettel) — APN: `telenor.hu` or `internet.telenor.hu`. Telenor Hungary rebranded to Yettel but existing SIMs may still use the old APN.

Pakistan — APN: `telenor`. The standard APN works for all Telenor Pakistan data plans including 4G.

Bangladesh — APN: `telenor`. Telenor owns Grameenphone in Bangladesh; the APN may be `telenor` or a Grameenphone-specific value.

Thailand (dtac) — APN: `dtac`. Telenor operates as dtac in Thailand. Use the dtac APN settings for data.

Malaysia (Digi) — APN: `digi` or `celcomdigi`. Telenor merged Digi with Celcom; use the Digi APN profile.

Myanmar — APN: `telenor`. Telenor Myanmar (now Atom) may use the same APN or a market-specific value.

Before calling support

Final checks if the APN does not work

  • Confirm that the SIM is the selected data line on dual-SIM phones.
  • Check that the data plan is active and not blocked by a spending cap.
  • Remove duplicate APNs only after recording the original values.
  • Test outside or near a window to separate APN problems from weak signal.
  • Pause VPN, private DNS or device management for one controlled test.

Questions

Telenor APN questions

Should I change every Telenor APN field?

No. Change the APN value first and keep hidden network fields on their current defaults unless your carrier gives exact values for your plan.

What is the Telenor Norway APN?

The standard Telenor Norway APN is `telenor`. It works for 4G and 5G on most plans without additional configuration.

Does Telenor require a username and password?

No. Most Telenor plans across all markets do not require a username or password for the APN.

What APN does Telenor use in Pakistan?

Telenor Pakistan uses `telenor` as the APN. No username or password is needed.

Does the same APN work for hotspot and tethering?

Yes, the standard Telenor APN typically supports hotspot and tethering without modification. Test regular data first before troubleshooting hotspot.

My Telenor SIM is from Hungary and data does not work?

Telenor Hungary rebranded to Yettel. Try the APN `telenor.hu` or `internet.telenor.hu`. If those fail, contact Yettel support for the current APN.

Maya Chen

Author

Maya Chen

Mobile connectivity editor

Maya edits practical guides for APN setup, mobile data recovery, roaming checks and device network troubleshooting.

Credentials: Specialized in consumer mobile connectivity documentation, APN field review and device setup workflows for Android, iPhone and travel SIMs.

Experience: Has produced setup documentation for mobile users who need to separate carrier profile issues from signal, SIM, roaming and plan restrictions.

Updated: 2026-06-23 Editorial policy Corrections

Why trust this guide

The guides favor minimal field changes, device-specific paths and clear testing steps instead of unsafe copy-paste profile edits.

Share

Send this guide to someone fixing the same mobile data issue.