Start here
Airalo eSIMs configure themselves — only change the APN if data does not work
Airalo sells data-only eSIMs for international travel. When you install an Airalo eSIM, the APN is configured automatically from the eSIM profile. In most cases you do not need to enter anything manually.
Manual APN configuration is only needed if the eSIM profile does not set the APN correctly, or if you are using an older device that requires manual setup.
The most common Airalo APN is airalo.com. Some regional eSIMs use a different APN — check your eSIM installation guide.
APN fields
Airalo eSIM APN starting point
| Field | Value | Note |
|---|---|---|
| APN | airalo.com | Most common Airalo APN. Your eSIM guide may specify a different value. |
| Username | Not set | Airalo eSIMs do not require a username. |
| Password | Not set | Airalo eSIMs do not require a password. |
| APN type | default,supl | Data-only APN. MMS is not supported on data eSIMs. |
| Protocol | IPv4/IPv6 or device default | Keep the device default when unsure. |
| MCC/MNC | From eSIM profile | Set automatically by the eSIM. Do not change. |
| MMSC | Not applicable | Airalo eSIMs are data-only and do not support MMS. |
If your Airalo eSIM guide specifies a different APN, use that value instead of airalo.com. The eSIM profile usually sets everything automatically.
Setup
Check APN on Android after installing Airalo eSIM
- Install the Airalo eSIM following the QR code or manual installation steps.
- Go to Settings, Network & Internet, SIMs, and select the Airalo eSIM.
- Tap Access Point Names and check if an APN is already present.
- If the APN is present and data works, no change is needed.
- If no APN exists, tap + to create one and enter airalo.com as the APN.
- Leave username, password, and other fields at default.
- Save, enable the eSIM for data, disable WiFi and test.
Setup
Check APN on iPhone after installing Airalo eSIM
- Install the Airalo eSIM QR code from Settings, Cellular, Add eSIM.
- After installation, tap the Airalo line under Cellular Plans.
- Tap Cellular Data Network and check if the APN is filled in.
- If blank, enter airalo.com in the APN field.
- Leave username and password fields blank.
- Select the Airalo eSIM for data, disable WiFi and test in Safari.
Guide
Full setup and troubleshooting notes
Before changing the APN
Airalo eSIMs are designed to work without manual configuration. When you scan the QR code or install the eSIM profile, the APN and network settings are installed automatically.
If data does not work after installation, the issue is usually not the APN. First check: the eSIM is turned on in Settings, the eSIM is selected for cellular data, and data roaming is enabled if you are outside your home country.
APN values
The standard Airalo APN is airalo.com. Some regional eSIMs (Discover+, local eSIMs) may use different APN values. Check the eSIM installation instructions in your Airalo app or email.
Data-only eSIM limitations
Airalo eSIMs are data-only. They do not support: - Voice calls (except some Discover+ eSIMs that include a local number) - SMS text messages - MMS (picture messages)
Hotspot / tethering
Airalo eSIMs support hotspot on most packages where the device allows it. On iPhone, go to Settings, Cellular, tap the Airalo eSIM, and enable Allow Cellular Data Switching or Personal Hotspot. On Android, hotspot should work automatically.
Testing
After enabling the eSIM, make sure data roaming is on (required even in the destination country for some eSIMs) and disable WiFi. Toggle airplane mode for ten seconds and test in a browser.
Quick diagnostics
Checks if Airalo data does not work
- Confirm the Airalo eSIM is turned on in Settings.
- Make sure the Airalo eSIM is selected for mobile data.
- Enable data roaming (required for most Airalo eSIMs).
- If roaming does not fix it, toggle airplane mode for 10 seconds.
- Restart the phone to refresh network registration.
- Check your Airalo eSIM has not expired or run out of data.
Questions
Airalo eSIM APN questions
What APN does Airalo use?
The most common Airalo APN is airalo.com. Some regional eSIMs may use a different APN specified in the installation guide.
Do I need to enter an APN for Airalo?
No. Airalo eSIMs install the APN automatically from the eSIM profile. Manual entry is rarely needed.
Does Airalo support MMS?
No. Airalo eSIMs are data-only and do not support MMS or SMS.
Can I use hotspot with Airalo?
Yes, most Airalo eSIMs support hotspot/tethering. Enable it in your phone settings.
Why is my Airalo eSIM not working?
Check: eSIM is turned on, selected for data, data roaming is enabled, and the eSIM has not expired. Restart the phone if nothing works.
Does Airalo support 5G?
Yes, where the local network supports 5G. The same APN works for 5G.
Next
Related guides
Continue with the closest setup path.
